01
Powertrain configuration
Sinotruck Howo Garbage Truck is published with engine power: 371/2200 and drive type: 6*4. The final combination is reviewed against the intended route and duty cycle.
other truck
Sinotruck Howo Garbage Truck
SINOTRUK garbage truck is designed for municipal waste collection and transportation, with efficient compaction system.
Product Details
Published configuration
Use the published values as the starting point for configuration review. Prepare an RFQ to confirm operating conditions, destination requirements and unlisted specifications.
- Engine power
- 371/2200
- Engine brand
- SINOTRUK Brand,WD615.47,EURO-2
- Transmission
- HW19710, 10 forward and 2 reverse
- Drive type
- 6*4
- Front axle
- HF7
Available specifications
Configuration by system
Values below are preserved exactly as published. Missing fields are marked for confirmation.
Powertrain
- Engine power
- 371/2200
- Engine brand
- SINOTRUK Brand,WD615.47,EURO-2
- Transmission
- HW19710, 10 forward and 2 reverse
Chassis
- Drive type
- 6*4
- Front axle
- HF7
- Rear axle
- ST16
- Tyre
- 12.00R20 Radial tyre
Dimensions
Not published — mark for Data review and confirm in the RFQ.
Capacity
- Payload capacity
- 10000 kg
- Curb weight
- 15000 kg
- Tank volume
- 18.5
Other specifications
- Control mode
- Automatic
- Gross vehicle mass
- 25000 kg
- Chassis
- Howo
- Fuel consumption
- 29
- Vehicle model
- QDZ5251ZYSA
- Chassis model
- ZZ1257N4341W
- Turning radius
- 21.6
- Maximum speed
- 90 km/h
- Braking
- Dual circuit compressed air service bake, spring energy parking brake, engine exhaust auxiliary brake, ABS for option
- Hydraulic system
- Dia.430mm, Hydraulically operating with air assitance
- Steering
- ZF8098
- Vehicle type
- Refuse compactor truck
Capability review
Performance
Sinotruck Howo Garbage Truck combines drive type: 6*4 with engine power: 371/2200. The published values provide a factual starting point for matching the vehicle to route, cargo, body and destination requirements.
02
Transmission and axle matching
For Sinotruck Howo Garbage Truck, the available record lists transmission: hw19710, 10 forward and 2 reverse and front axle: hf7. These values provide the basis for configuration confirmation before quotation.
03
Working configuration
For Sinotruck Howo Garbage Truck, payload capacity: 10000 kg. Provide cargo, operating conditions and destination requirements for a complete review.
Product gallery
Vehicle views
1 / 3Where it fits
SINOTRUK Application Areas
Review operating scenarios selected from the published vehicle type. Final suitability depends on route, load, body and destination requirements.
Purpose-built site operations
Sinotruck Howo Garbage Truck: The chassis and upper body are reviewed as one working system for the specified task.
- —Duty definition
- —Upper-body matching
- —Site conditions
Construction and industrial sites
Sinotruck Howo Garbage Truck: Drive form, axle configuration and working equipment are matched to the declared site conditions.
- —Site access
- —Working cycle
- —Configuration confirmation
Municipal and fleet projects
Sinotruck Howo Garbage Truck: Documentation, repeatable specifications and delivery coordination support multi-vehicle procurement.
- —Project requirements
- —Fleet consistency
- —Delivery planning
Procurement planning
SINOTRUK Solutions
Connect the published vehicle record to the configuration, documentation and support inputs needed for an export enquiry.
Duty-matched powertrain
The published Sinotruck Howo Garbage Truck record lists engine power: 371/2200 and transmission: hw19710, 10 forward and 2 reverse. Final matching follows the route and operating requirement.
- Route and gradient review
- Powertrain comparison
- Destination emission confirmation
Chassis and body coordination
Sinotruck Howo Garbage Truck lists drive type: 6*4 and payload capacity: 10000 kg, providing the starting facts for reviewing chassis, body and loading requirements together.
- Chassis configuration
- Body or equipment matching
- Loading method review
Parts and maintenance preparation
For Sinotruck Howo Garbage Truck, the vehicle reference, configuration list and destination should be recorded so parts identification and published maintenance information remain traceable.
- Product reference record
- Parts identification inputs
- Published maintenance documents
From selection to operation
SINOTRUK Customer Service
Use these service paths to prepare a traceable enquiry for Sinotruck Howo Garbage Truck. Service scope is confirmed for each order and destination. These are enquiry preparation paths available through this website, not a universal manufacturer service or warranty statement.
Configuration consultation
Organize application, route, destination and option requirements before the quotation configuration is confirmed.
Open service pathParts identification
Use the vehicle reference, VIN when available, part number and photos to support a compatibility review.
Open service path
Maintenance information
Locate published maintenance guidance and prepare the exact vehicle record needed for a technical enquiry.
Open service path
Delivery coordination
Align inspection inputs, product documents and transport requirements within the confirmed order scope.
Open service pathBuyer questions
Frequently Asked Questions
Answers use the published product record and explain what still needs confirmation before quotation.
What drive and power options are published for the Sinotruck Howo Garbage Truck?
The current Sinotruck Howo Garbage Truck catalogue record lists drive type: 6*4 and engine power: 371/2200. Availability can vary by destination, so these values should be confirmed in the signed configuration sheet.
How should the Sinotruck Howo Garbage Truck be configured for its intended work?
Start with the planned cargo or task, route surface, gradient, daily distance and destination rules. The published product information identifies the Sinotruck Howo Garbage Truck as a other truck; the final body, axle and powertrain combination is confirmed from those operating inputs.
Which transmission and working configuration are listed for the Sinotruck Howo Garbage Truck?
For the Sinotruck Howo Garbage Truck, the published details state transmission: hw19710, 10 forward and 2 reverse and payload capacity: 10000 kg. Treat them as the configuration review baseline rather than a statement that every combination is available in every market.
What information is needed to request a quote for the Sinotruck Howo Garbage Truck?
Provide the Sinotruck Howo Garbage Truck model name, required quantity, intended cargo or application, road conditions, destination country or port, preferred emission level and any body or optional-equipment requirements.
How are maintenance information and replacement parts identified for the Sinotruck Howo Garbage Truck?
Keep the Sinotruck Howo Garbage Truck product reference, final configuration sheet and vehicle identification details together. For a parts enquiry, provide the VIN when available, the existing part number, clear photos and required quantity so compatibility can be reviewed.